EcoSoya® CB-XceL™ is 100%
soy and molecularly blueprinted to control polymorphism. It has extreme
resistance to bloom (white frosting) and “wet spots,” while producing an
excellent scent throw with fragrances. It maintains an even burn pool with
consistent color retention.
CB-XceL™ requires one pour
and new technology allows for top surface re-melting. CB-XceL™ has the highest
melt point of all our container waxes, enabling shipment to all climates. CB-XceL™
has a maximum fragrance load of 12%.
EcoSoya® CB-XceL™ Melt
Point: 125 °F Container Candle Soy Wax.
Instructions for use:
Heat wax to 175-190*, add
dye (liquid dyes may cause excess frosting in soy) and blend well, add fragrance
and again blend well. We recommend adding scent between 150*-175* for the best
It is typical for wax to
solidify at the beginning of the pour during its first contact with the
container. CB-XceL™ should have a pour temperature that is high enough so
that when the container is full, the initial solidified wax has re-melted. The
temperature should not be so high that the liquid wax sits more than 30 minutes
before starting to solidify.
Pour temperatures will vary
according to container type and size, fragrance and dye, and the effects you
want to achieve. CB-XceL™ can be poured as low as 107° F (41.7° C) if the wax
is kept in motion (constant mixing) until poured.
There is a difference in
cooling rates for different container configurations. Cooling too quickly or
too slowly can cause concaving and/or frosting. Large jars, such apothecaries
and large candles, above 12 oz (356 ml), should be poured at about 155°F
(68.3°C). Smaller candles of 12oz (356 ml) or less should be poured at 130°F
(54.4°C). If there are any occurrences with frosting, lower the pour
temperature in increments of 10°F (6°C). Conversely, if there are any
imperfections in the candle top, raise the pour temperature in increments of
10°F (6°C). The goal is to balance the pour temperature to achieve optimal
results. Candle tops may be re-melted as required.
When candles are poured at a
lower temperature (about 110°F (43.3°C)), add the scent at a higher temperature
(about 140°F (60°C)) and allow the wax to cool to the desired pour temperature.
temperatures should be checked and confirmed according to seasonal changes .
A MSDS for this product is
available in a printable format