IGI Paraflex 4625 is an
excellent pre-blended paraffin pillar wax. 4625
will require multiple pours to achieve level a surface. In most applications
allowing the candle to cool completely after the first pour and doing a second
pour will yield a level candle surface. Suitable for warmer climates. As with
all candles, you will need to protect against temperature fluctuations during
transport and storage. 4625 will hold up to a 9% fragrance load and has
excellent hot and cold scent throw. IGI 4625 has a smooth, creamy and opaque
appearance and will have a matte finish. IGI 4625 also works very well for
making votive candles.
IGI Paraflex 4625
Melt Point: 145°F Pre-Blend Pillar Paraffin Wax.
This wax will also work well for making wax votive candles. This wax is meant
for making free standing pillar candles & votive candles that will be burned in
a votive glass.
Instructions for use:
Heat wax to 190-200*. Once
wax reaches desired temp, add your dye, blend well then add fragrance and again
blend well. This wax should be poured between 185-195* into heated molds to
minimize skip lines. It is advisable to poke relief holes around the wick of the
candle once the wax has become solid but is still pliable.
After the first pour has
cooled some, reheat your reserved wax from your first pour and refill the void
(sink hole) in the candle until you reach the level of the first pour. You will
want your second pour to be 10* hotter than your first pour to minimize lines
from the second pour. Repeat the repour process as necessary.
A MSDS for this product is
available in a printable format