IGI Paraflex 4794 is an
excellent pre-blend paraffin votive wax. 4794 will require multiple pours to
achieve level a surface. In most applications, allowing the candle to cool completely
after the first pour and doing a second pour will yield a level candle surface.
Because of the low melt point, this wax works exceptionally well in containers
as well. In a container this wax will completely pull away from the glass,
excellent for those that just can not stand to see "wet spots" on
their jars! This wax is suitable for warmer climates. As with all candles, you
will need to protect against temperature fluctuations during transport and
storage. 4794 will hold up to a 9% fragrance load and has excellent hot and
cold scent throw. IGI 4794 has a smooth, creamy and opaque appearance and will
have a matte finish.
IGI Paraflex 4794 Melt
Point: 128°F Container Pre-Blend Votive Paraffin Wax. This wax will also work
well for making wax melts & container candles. This wax can NOT be used to
make free standing pillar candles.
Uses: IGI 4794 can be used to make Container Candles, Tea
Light Candles and Wax Melts.
Fragrance Load: Up to 9% is possible.
Dye: Liquid, Chip, Block, Flake & Powder Dye can all be used
in this wax
Wick Suggestions: Zinc, RRD, HTP, CD Hemp, Performa, LX
Type: IGI 4794
is a Blended Paraffin
Additive Suggestion: IGI 4794 has the optimal blend of additives
already in the wax. You may want to however add UV Color Stabilizer to prevent
fading and chemical color change.
Instructions for use:
Heat wax to 180-190°. Once
wax reaches desired temp, add your dye, blend well then add fragrance and again
blend well. This wax should be poured between 175°-185° into heated
molds/containers to minimize skip lines. It is advisable to poke relief holes
around the wick of the candle once the wax has become solid but is still
After the first pour has
cooled, reheat your reserved wax from your first pour and refill the void (sink
hole) in the candle until you reach the level of the first pour. You will want
your second pour to be 10* hotter than your first pour to minimize lines from
the second pour. Repeat the re-pour process as necessary.
When using this wax for a
plastic Clamshell Melt, be sure to cool the wax to 150 to no more than 160° to
pour to avoid melting the packaging.
A MSDS for this product is
available in a printable format here.
purposes, we offer for sale, 10 pound slabs or bags of wax.
*We can only offer recommendations as to what wax will perhaps
work best for you but we cannot guarantee any certain wax to work best in any application
because of the many variables involved. The only way to determine the
appropriate wax selection is by experimentation. Test burning will be necessary
to determine the best wax for your candles!